Your Guide to Natural Stone Tile Sealer

There are various natural stone sealers you can use to seal your stone floor – each with a different finish. Whether you want a completely natural, gloss, matt, or silky finish, it’s important that you choose the right sealer for your project.

Colour Intensifying Stone Sealer

If you’re looking to intensify the natural colour of your stone to make it pop, you will need LTP’s Colour Intensifier and Stain Block for Natural Stone Tiles – suitable for both interior and exterior use. By using this sealer, you will protect your natural stone against water, oil, grease, and dirt, while allowing the stone to breathe.

The Colour Intensifying Stone Sealer is most suitable for slate, tumbled marble, marble, limestone, granite, terrazzo, quarry tiles, and a variety of other types of natural and artificial stone.

 

Matt Finish Stone Sealer

If you’re looking for a natural finish with minimal alteration in colour and texture, LTP’s Mattstone Sealer for Natural Stone Tiles is a perfect choice. This sealer will protect against staining – repelling water, oil, and grease – while allowing the surface to breathe and giving your natural stone a matt (natural) finish.

The Mattstone Sealer is suitable for travertine, limestone, terracotta, quarry tiles, slate, sandstone, marble, concrete, brick, and external paving.

 

 

Stone Sealer for Terracotta Tiles

If you’re purchasing our handmade traditional terracotta floor tiles, we recommend using LTP’s traditional terracotta stone sealer with boiled linseed oil. The oil is golden in colour and will protect your terracotta tiles while enhancing the colour. This sealer is for internal use only.

Tip: Before you begin, experiment on a tile or two to review the number of coats required for full saturation and your ideal finish. It’s important that, once you’ve covered the terracotta tiles, you not let the oil oxidise on the surface of the tile. Remove any surplus that’s not absorbed into the tiles within one hour of the application using a clean cloth.

 

Gloss Finish Stone Sealer

Looking to achieve a glossy finish? You need LTP’s Ironwax Gloss Finish Sealer. The sealer will form an acrylic seal on your tiles, enhancing the colour and texture while protecting against staining. This sealer is for interior use only – it is not suitable for wet areas such as showers – and is suitable for travertine, limestone, sandstone, slate, unpolished marble, terracotta, quarry tiles, bricks, terrazzo, and concrete.

Tip: On more porous surfaces, pre-seal with LTP Mattstone H20 Impregnating Sealer.

 

 

Satin Finish Stone Sealer

If you’re seeking a silky, matt-finish, you can seal your tiles with LTP’s Ironwax Satin Finish Sealer for Natural Stone. The sealer will form an acrylic seal while enhancing colour and texture, and protecting against staining and dirt. This sealer is for interior use only – it is not suitable for wet areas such as showers – and is suitable for travertine, limestone, sandstone, slate, unpolished marble, terracotta, porous quarry stone, bricks, terrazzo, and concrete.

Tip: On more porous surfaces, pre-seal with LTP Mattstone H20 Impregnating Sealer.

 

If you have any questions about which natural stone sealer you need for your project, please contact our sales team at [email protected].
0

Leave a Reply

Cart